Windows is the most used platform despite the fact that it is often the source of errors. A very common mistake exclusive to laptop users in recent months is the problem ” plugged in not charging“.
In this article, I will tell you how to fix the problem on Windows 10 or even in Windows 7, Windows 8 and other versions.
What is a “plugged in not charging” error?
When you plug in your PC, the screen lights up with the sound of the charge indicator usual and the LED indication lights up.
However, when some users have upgraded their operating system to Windows 10, their PCs encountered an issue that reads like this:
“XX% available (plugged in not charging)
This issue prevented their laptops from recharging. You might think that the problem is due to some sort of failure of the internal part, but it is possible that this is the case or not.
Reasons causing “plugged in not charging” in Windows 10
There are several different reasons for battery failure .
Here are the relevant reasons that come into play when you upgrade to Windows 10 :
● Outdated, corrupted, or misconfigured device drivers.
● Unwanted interference in system settings.
● Virus, Malware or Spyware.
● Some software or hardware interrupts normal operation.
Here are the easiest and most effective solutions you can try to fix this problem:
Method 1. Restart your PC
This is the most common way of working, but also the most widespread. Here are the steps to follow:
Step 1 : Turn off and unplug the power cable.
2nd step : Remove the drums and place it near an air conditioner or cooler for 3 minutes.
Step 3: Put it back into place and restart the system. Reconnect the power cable and check if your problem is resolved.
It could have solved the problem. If the problem persists, continue to the next method.
Method 2: Direct connection to an AC power source without a surge protector
The lightning arresters or others power conditioners can change thesinusoidal input of the AC mains supply and your charger is not working as expected.
Most systems can detect these irregularities and refuse entry of the charger into the battery. Try plugging your charger directly into your outlet without going through a surge protector. Also check the connections between the power outlet and your DC port.
Method 3: Do not plug in the device until the system has fully booted up.
You must at least have energy on your battery for that. Remove your charger, start your system until all icons are displayed, then plug in your charger.
See as well : [TiWorker Cpu ] : 7 Solutions to Solve the Problem
Method 4: Update the battery drivers to resolve charging issues
This is the working method the most efficient. You should try this in order to fix theerror plugged in not charging under Windows 10.
Here are the necessary steps. The steps have been divided into two parts for your convenience:
Step 1 : First, right-click on the ” Windows »To develop his menu. Then locate and click ” Device Manager “.
2nd step : In the window ” Device Manager“, Expand the option” Batteries »By clicking on the associated side arrow.
Step 3: Right-click on ” Microsoft ACPI Compatible Control Method Battery “And then click on the option” Uninstall“.
Step 1 : Move your eyes up a bit and click on the ” Actions »Present right next to« File“. Then click on the option ” Check for hardware changes“.
2nd step : Expand the option again as you did previously. Right-click on ” Microsoft ACPI Compatible Control Method Battery«, Then click on« Driver software update“.
Step 3 : If the required driver is available in your system, click on the option ” Browse my computer for driver software And select the driver. If not, let Windows ” Automatically check for updated drivers“.
Step 4: Wait for partitioning for the process to complete. Then restart.
It was the best working method to solve the problem of “plugged in not charging” on your PC. You can now enjoy using it without worrying.
Method 5: Let it discharge for a while
Charge to 100% and leaving it plugged in significantly reduces its lifetime. Left your battery at 0% can also do the same to you. Most PCs currently have a integrated intelligent to manage charge cycles.
If he indicates that she is not about 80 to 97% charged, then this is not a fault or a problem. the firmware where the pilot is probably configured not to recharge when it is very close to 100%.
Remove your charger, let the pc stand discharge for a while up to less than 80% or 50% for some laptops, then plug it in. It should resume automatically.
See also: 5 Methods to Fix “Idp Generic Virus” Easily
Method 7: Unload your motherboard
That will discharge the motherboard capacitors, and will force the battery to recalibrate and realign with the charger.
- Stop the system.
- Disconnect all external devices (drives, printers, external hard drives, mice), etc.).
- Unplug the AC adapter and remove it.
- If he does not have removable battery, there is usually a small hole in the back that you can use a paper clip to simulate a removed battery (press the thumbtack and hold it in place).
- Hold down the power button for 20 to 30 seconds to release the residual charge.
- Blowing compressed air into all the holes and orifices on your laptop can help remove charged dust particles.
- Reconnect the AC adapter.
- After powering on and starting the system correctly, reposition the battery. Check if you still get the error or not.
Method 8: Reset BIOS settings to default
If the problem is related toux firmware settings, you can reset BIOS in :
- Shut down your pc
- Press on the power button and immediately press F2 or F10 for access BIOS.
- Press on F9 for load defaults, Press on F10 for accept changes or leave during saving changes.
- You can also exit with the default values.
- It is not recommended to use the laptop when the AC adapter is connected.
- It is not recommended to keep the AC adapter plugged in even after it is fully charged.
- You must allow the battery to discharge completely before recharging it.
- The power plan must be set correctly to prolong battery life.
- Please keep the screen brightness at a lower level.
- Please turn off the Wi-Fi connection when not in use.
- Please remove CDs / DVDs from the optical drive when not in use.