[7 Solutions] Solve “WHEA UNCORRECTABLE ERROR”


WHEA UNCORRECTABLE ERROR (stop code 0x00000124) is a Windows Architecture (WHEA) hardware error.

There are several common causes, most of which relate directly to hardware:

  • Corrupted hardware (damaged hard drives, GPU, CPU, PSU, corrupted RAM, etc.)
  • Driver compatibility issues
  • Heat and pressure issues (Overclocking and pressure variations).
  • Corrupted system files or registry files

Additionally, an improperly configured or outdated driver that causes conflicts in system I / O, system file, or registry storage directory that is corrupted or missing, or drive read / write errors, power failures, or errors. virus attacks.

WHEA UNCORRECTABLE ERROR
WHEA UNCORRECTABLE ERROR

Method 1: Check for update


check windows updateObtaining the latest update aide to correct WHEA UNCORRECTABLE ERROR.

To check :
STEP 1 : Go to Settings click on Update and security then Windows Update and Check for updates.

2ND STEP : If there is a new update, get it and see if the blue screen WHEA UNCORRECTABLE ERROR appears again.


Method 2 – Disable Overclock in BIOS


The most common correction for WHEA UNCORRECTABLE ERROR is of disable Overclock of your BIOS. To do this, just follow the following steps:

  • Open menu To start up and go to Settings.
  • Go to Update and security, then in the tab Recovery.
  • Click on To restart in Advanced start and your computer will restart.
  • At advanced start, go to Repair, then Advanced options, then Load UEFI Firmware Settings.
load UEFI Firmware Settings
Load UEFI Firmware Settings
  • Click on To restart.
  • Once the computer has restarted it should open automatically, so go to the tab Advanced.
  • Navigate for performance and seek Overclocking.
  • Make sure theoverclocking is disabled.
  • Save Changes brought to BIOS (by pressing the F10 on your keyboard), and start your computer normally.
disable overclocking
Disable overclocking
  • After having overclocking disabled, you should no longer be facing this problem, but if it is still present, check one of the following solutions.

See also: (10 Solutions) Resolve Error 0x8000ffff


Method 3 – Boot into Safe Mode and check if the drivers.


  1. Restart or close the Windows 8.1 or 10 PC.
  2. . When the PC starts up, press the F8 on the keyboard or on another key. Would be Shift + F8.
  3. The recovery mode must start.
  4. In recovery mode, you must select safe mode by following the on-screen instructions.
  5. After the computer starts in safe mode, place the mouse on the right side of the screen and click in the search box of the Start menu.
  6. Type in the search box Device Manager.
  7. After the opening of the Device Manager, we must update drivers one by one.
  8. This way we will see if any of our pilots brought up this error.
  9. After having updated drivers, we have to restart the PC.
  10. See if you get the same error message.
update drivers in safe mode
Driver in Safe Mode

Method 4: Check for corrupt files


Occasionally “WHEA UNCORRECTABLE ERROR 0x00000124 blue screen »May be due to a corrupted file.

To find corrupt registry files, you just need to do a scan. First, open thecommand prompt as administrator.

Type sfc / scannow and press Entrance. Wait for the process to complete.

scannow command
Scan now command

Method 5: System restore


Run the restoration can return to the state when the pc is working properly.

If you have activated the system protection, from catering points are generated when you install a new update, new application, or new driver.

To restore your PC to a restore point:

STEP 1 : Open the Control panel > Recovery.
2ND STEP : Click on Open System Restore > Following.
STEP 3: Select un catering point to be restored.

If there is no restore point, you can have a system protection disabled. The system Restauration will not delete personal files, but will delete updates, applications Where pilots recently installed.

System Restore
Restoration

See as well : [Résolu]How to Fix Outlook Error 0x800CCC67


Method 6: Run chkdsk to check hard drive


Since WHEA UNCORRECTABLE ERROR can be caused by hard drive error, you may need to check if there is a hard drive error from your PC.

CHKDSK, abbreviation of ” check disk“, Is a command which is used to check a disc and to fix Where to recover data on the drive if necessary.

STEP 1 : Right-click on the button To start up and click on To research. Come in cmd and open the‘command prompt.

2ND STEP : Type: chkdsk / f / r / r C :. Press on Entrance. / f means to correct a disk error and / r is to recover data from the rear sector.

C represents the C drive that Windows will check. If you want to check another drive, replace C with another drive letter.

STEP 3: A line will appear saying: “Do you want this volume to be checked at the next boot? ” Choose Yes to restart the PC and start the verification and the repair of the disc.

chkdsk / f / r
chkdsk / f / r

WHEA UNCORRECTABLE ERROR will be gone.


Method 7: Run Windows Memory Diagnostic to Test RAM


memory diagnostic tool

THE” Windows Memory Diagnostic Tool allows you to test the RAM and see if RAM is the cause of the problem.

STEP 1. Right-click on the button To start up and click on To research. Enter the memory and click on Windows memory diagnostics.

The computer restarts and starts up under Windows memory diagnostics. Let the tool run the test. If an error is detected, it will be reported.

Leave a Comment