[5 Solutions] Repair “Critical Process Died” Windows 10


When you are using the computer, and it suddenly crashes with a blue screen and causes this message: Critical Process Died on Windows 10. The most common problem encountered on computers after installing a few updates. One of the most annoying mistakes.

Critical Process Died error


What is Critical Process Died Windows 10 error?


The “Critical Process Died” blue screen occurs with the code oferror 0X000000EF which means that a critical computer system process is dead.

This error can usually cause some problem in the computer like hard drive damage, of Memory and sometimes processor.

However, if the problem is identified, fix it as soon as possible, you can continue to use the computer without any problem.


When does this blue screen error occur?


It appears in different cases. We have mentioned some of the most common examples:
Critical Process Died after Update : It occurs after installing the latest updates or upgrading to the latest version of the computer.

  • After setting up : Sometimes when the user tries to start the computer after standby, the system crashes.
    – After logging in: : The error also occurred after logging into the computer. As soon as you log into the computer, the system plant and restart automatically.
    – After the creators update: The system has plant for most users after installing it.
    – While you play: When you play games in the computer you will see these types of system errors frequently.
    – Critical Process Died Windows 10 Loop Error: System crashes can sometimes trigger loops, preventing users from using their computer.
    – Critical Process Died at startup: Most of the users also reported that the system crash occurred during start-up computer before logging in.

These are cases where the system crashes. There could be other cases as well. However, you can follow the step by step procedure in this article to resolve the issue.



Follow the solving steps below one by one and check whether the problem has been corrected after each step. If it remains after each step, you can then move on to the next resolution steps.

Note: Before making any changes to your computer, I suggest you create a system restore point, so you can restore your system to the previous working state if something is wrong.


Start your computer in safe mode


There are several ways to start your computer andn safe mode. Most computers detect the F8 key or Shift + F8 keys before start-up to open the operating options menu. advanced startup.

To use this method, perform the following steps:

Press on the F8 key or on the keys Shift + F8 before booting in order to enter recovery mode. (Pro tip: keep pressing keys until you get to recovery. Try both F8 and Shift + F8 on separate reboots if one of them doesn’t work).

Use the arrow keys to select advanced startup options and click Entrance. Use the keys arrows to select the safe mode and click on Entrance.

You can also use the safe mode with networking, but this is not recommended because the pilot of your chip Wireless could be the guilty.

Windows 10 safe mode
Windows 10 safe mode

Method 1: Check the drivers


The very first thing you should do when faced with a BSOD with an error Critical Process Died is to check the pilots. The faulty drivers are one of the most common reasons for this error. If you find a faulty driver or one broken down equipment, the problem will most likely be solved.

Note : Since the problem can be caused by any pilot, we will only show the steps to solve the problem for one device. You can repeat the steps forother devices / drivers.

It’s just to show you how to fix the problem, the steps will be the same for others except your device name.

  • Hold the key Windows and press R
  • Type devmgmt.msc and press Entrance.
  • Locate and double click Sound, video and game controller
Device Manager
Device Manager

Check if any of your devices have a yellow warning sign. The yellow warning sign indicates that there is a problem. If you see a red sign, it means that Windows is having trouble establishing a connection with this device.

The steps to follow in both cases are described below. You should also check the others peripherals / driver in the device Manager and repeat the steps below if you find any yellow or red signs with these devices.

If you see a yellow warning sign, do the following:

  • Right click on your adapter and select Update the driver
  • To select Search automatically for driver update
driver update
driver update

If you can’t find anything, go to the website manufacturer of your card and find the latest driver version.

Download the latest pilot from the website where you can easily find it later. Once you have found the latest driver version.

Follow the next steps;

  • Hold the key Windows and press R
  • Type devmgmt.msc and press Entrance.
  • Locate and double click Sound, video and game controller
  • Right click on your sound card / device and select Properties.
  • Click on the tab Pilot
  • Look at the driver version and check if it is the same as the latest version you downloaded from the manufacturer’s website.

If not, close the sound card or device. (you should be back at the window of the device Manager)

  • Locate and double click Sound, video and game controller
  • Select your sound card / device and click on it with the right mouse button.
  • Select Update Driver Software….
  • Select Browse my computer to find the pilot
  • Click on Browse and navigate to the location where you have downloaded the latest driver. Select the driver and click To open
  • Click on next and follow the on-screen instructions
search driver computer
search driver computer

If the problem is still not resolved, you must uninstall the driver and let Windows install a generic set of audio drivers. This will most likely fix the problem since it installs the most compatible drivers.

  • Hold the key Windows and press R
  • Type devmgmt.msc and press Entrance.
  • Locate and double click Sound, video and game controller
  • Select your sound card / device and click on it with the right mouse button. Select Uninstall and follow the on-screen instructions.
  • Restart your computer
uninstall display driver
uninstall display driver

After your computer has restarted, Windows should have automatically installed the new generic driver for your peripheral. This should fix the problem.

If you see a red sign with your device, follow these steps:

Make sure the sound card is correctly connected to the computer. Shut down your computer, open the your computer case and make sure the card is correctly connected.

In addition, check if there are any property damage. Once the check has been carried out, close the housing and check the status of the device / card again.

red sign on pilot
Red sign on pilot

If that doesn’t solve the problem, try another device / card to see if the device / card is faulty.

See also: Easily Fix WerFault.exe Error (7 Methods)


Method 2: Run SFC (System File Checker)


SFC is an abbreviation for System File Checker utility. It helps you replace corrupt or faulty system files by new ones.

  • On your keyboard, press the Windows and type cmd. Right-click on Command Prompt and click on Execute as administrator.
  • Type sfc / scannow and press Entrance on your keyboard.
  • Restart your computer when verification is complete. See if the error ” Critical Process Died ” reproduce. If the problem persists, switch to another method.
scannow command
Scannow command

Method 3 – Run a Full System Virus Scan


Malware can also modify your system files. It is not necessarily a dangerous viruseven software spies Where advertising can damage your system files.

If running an analysis SFC did not help, run your anti-virus and run a full scan system on your computer in order to detect and remove softwares malicious.

virus scan
virus scan

You can use the built-in antivirus, Windows Defender or third-party antivirus.

here’s how run a full system scan in Windows 10 Creators Update :

  • Go to To start up ; type ‘Defender‘ and ; double click to launch tool
  • Click scan to run a full scan for malware on the system.
Windows Defender
Defender

See as well : [7 Solutions] Repair Error Code 80240020 Easily


Method 4 – Uninstall the latest updates


Some users have discovered that the latest Windows 10 updates trigger this problem. It could be a problem serious, since it contains all updates and that some updates are required so that the system is functioning normally.

But if a cumulative update is the one giving you errors, you can update it. remove, and you shouldn’t have any problems with it anymore. here’s how uninstall updates :

  • Go to Settings ; navigate to Windows Update and ; select the option ‘Update history’
  • Go to Uninstall updates
  • Select it or the updates you want uninstall and ; click on Uninstall.
uninstall update
Uninstall update

Cumulative updates include all updates previously published. When Microsoft releases a new update and you download, you will also receive an update that you owed uninstall because it caused BSOD.

Leave a Comment