[4 Méthodes] To Repair “Page Fault in Nonpaged Area”

BSOD or Blue Screen of Death is a blue screen error that has been bothering Windows users for years. It is displayed when a fatal system error has occurred, and a system crash. If it has not been corrected automatically after a reboot and you’re stuck in a BSOD loop, then you have to correct it by yourself.

One of these BSOD that bothers a lot of users is »Page Fault in Nonpaged Area« . If you are also one of those users, then worry no more. We will help you correct it using our methods. Just run the methods, one at a time, until the problem be solved.

page fault in nonpaged area error
page fault in nonpaged area error

Here are some negative effects of “Page Fault in Nonpaged Area”:

  • Operating system se planting frequently
  • Loss important data
  • Dysfunction equipment
  • Programs inaccessible

You may meet the BSOD Page Fault in Nonpaged area under 10, 8 / 8.1, and 7, as well as under Vista and XP. Here are some of the errors you might see:

  • stop: 0X0000000050 (error 0000000050)
  • STOP: 0x50 etc.
  • Driver names like ntfs.sys or ntoskrnl.exe

If you want to correct Page Fault in Nonpaged Area, keep reading this article and learn about various solutions to this problem.

It occurs when the Windows 10 operating system is unable to locate a system file in memory.
System files may go missing due to a driver not supported, of a update failed, of a Defective RAM or from corrupt software. So the hardware and the software.

Follow the methods mentioned below to resolve the issue.

9 Ways To Fix “Err Internet Disconnected” Easily

Method 1: Manage the paging file

To get started, you can try a simple trick with the paging file that fixes the problem for some users. If the problem is not hardware related then this solution may just work for you.

First, open the Control panel and click on System. You can also right-click on Computer Where This computer and choose Properties.

Next now click on Advanced system settings to the left

Advanced system settings
Advanced system settings

Under Performance, Click on the button Settings.

Click on the tab Advanced, then click the button To modify under the heading Virtual memory.

Finally, we have arrived where we need to be. Uncheck the box Automatic management of the paging file for drives size of the paging file for each drive.

Automatic management of the swap file
Automatic management of the swap file

Click several times on OK to get out of all the windows and restart your computer. Once back, follow the exact steps given above, but this time select System managed size and check the box Automatic management of the paging file for drives size of the paging file for each drive.

Like I said earlier, it works for some people, so if you still have blue screens, keep reading.

See as well: [10 Solutions] Repair “KERNEL DATA INPAGE ERROR”

Method 2: Using Windows Advanced Options

One of the methods you can use is to Start from the last known good configuration. With this method, your PC will be able to return to its settings recent before the error starts to occur.

Here are the steps to follow to apply this method:

  1. Turn off completely your computer.
  2. Turn on your computer. You should see a screen black with white during startup.
  3. On your keyboard, press F8 (Where F2 if you don’t see the results with the F8 key).
  4. Hold down the F8 key until the Windows advanced options menu is displayed..
    Last known good configuration option
    Last known good configuration option
  5. Once you get to the menu, look for the option Last Known Good Configuration, then press Entrance. Your computer should start with their settings. last known good configuration. Page Fault in Nonepaged Area should stop temporarily.
  6. Restart your computer, but instead of pressing F8 (or F2), press F12 (Where F10 if you don’t see the results with the F12 key)
  7. Hold down the F12 key for a few seconds. a new menu is displayed and you must select the option Disable memory cache.
  8. Once the selection is made, restart your computer and let it start completely.
  9. After startup, press Windows + R on your keyboard and type ” chkdsk / f / r C: “(Without quotes). Press on EntranceThe command will check the disk for errors and correct any problems on your hard disk. Check if the steps have eliminated thePage Fault in Nonepaged Area error.
chkdsk / f / r C:

Method 3: Disable and Update Bad Device Drivers

One of the possible causes ofPage Fault in Nonpaged Area error is the presence of a faulty device driver on your computer. In this case, you can update, disable, uninstall or reinstall the damaged driver. To do so follow the steps below:

  1. Go to the Control panel and select Device Manager. You can also click Windows + R, type ” devmgmt.msc »(Without quotes), and press Entrance.
  2. Device Manager
    Device Manager

    Search pilots who have a yellow exclamation mark. Right click on the driver, select Update the driver and follow the instructions.

  3. If the above step does not work, deactivate Where uninstall the faulty driver.
uninstall display driver
uninstall display driver

Also Read: Remove IDP.ALEXA.51 Virus: 5 Effective Ways

Method 4: Update the drivers for each device

update drivers in safe mode

Start Windows in Safe Mode and follow the steps.

  1. Right-click on the button To start up.
  2. Select Device Manager.
  3. Click with lRight mouse button on devices and select Update Driver.
  4. Select Automatically check for updated driver software.
  5. Update the drivers for each device.
  6. To restart the computer.

Leave a Comment