[10 Solutions] Resolve “DNS Server Not Responding”


Suddenly you can no longer access no website on the internet. Then you try to troubleshoot network problems on your Windows. It tells you an error DNS server is not responding . Don’t worry if this problem occurs. You can solve it with our following guide.

error DNS server is not responding
error DNS server is not responding

[9 Solutions] Fix “Server Execution Failed”


Solution 1. Check if the internet is working on other devices


Before starting, connect another device, such as a cell phone or laptop, to the same network and check if you can access the internet from these devices. If you can access the internet from these devices then the problem is at your computer.

If you cannot access the internet from these other devices as well, the problem may be DNS server, router or your Internet service provider. In this case, you can ignore most of the fixes below.

the router
the router

[Résolu] Swsetup.exe folder? Should we delete it?


Solution 2. Check the hosts file if only a few websites are not working


Sometimes it is possible that only some websites do not work on your system. One of the reasons may be that the website is blocked in the hosts file. To verify, it is advisable to make sure that the website you are trying to access is not stuck in the hosts file.

Search Notepad in the menu To start up, click on the right mouse button and select ” Execute as administrator“. Then click on the option ” File -> Open“. Go to ” C: Windows System32 drivers etc », select ” All the files In the file type drop-down menu, select the “hosts” file and click on the button ” To open“.

Select the hosts file
Select the hosts file

Your “hosts” file should look like the one in the image below. If it’s not the case, delete additional entries, save the file and try to access blocked websites.

The Hosts file
The Hosts file

[4 Solutions] My Mouse Doesn’t Work – Windows


Solution 3. Restart your router


Routers, for all kinds of reasons, behave strangely from time to time and you prevent internet access even if your ISP is no problem. I have encountered this problem several times before, then you have to stop your router and wait a while after you have to start it.

Unplug the router
Unplug the router

[5 Solutions] Repair MsMpEng High CPU Usage


Solution 4. Flush DNS and reset TCP / IP


  • Click with the right button mouse button To start up and select “Command prompt (admin)“.
  • type the following command and press Entrance after each order:

ipconfig / release
ipconfig / flushdns
ipconfig / renew

the ipconfig command
the ipconfig command
  • Open the command prompt again as administrator and type the following and press Entrance another time after each order:
    ipconfig / flushdns
    nbtstat -r
    netsh int ip reset
    netsh winsock reset reset
reset TCP / IP
reset TCP / IP
  • Restart to apply the changes. empty DNS seems to correct this DNS server not responding error in Windows 10.

[6 Solutions] Secureline Vpn Denied Your License File


Solution 5. Use Google DNS


  • Press the key Windows + R then type Control and press Entrance. Then click on Network and Internet.
  • Then click on Network and sharing center, then click Modify the parameters from the menu.
Change map settings
Change map settings
  • Select your Wireless then double click on it and select Properties.
Wifi properties
Wifi properties
  • Select Internet Protocol Version 4 (TCP / IPv4) and click on Properties.
Internet Protocol version 4 (TCP / IPv4)
Internet Protocol version 4 (TCP / IPv4)
  • Check the box ” Use the following DNS server addresses And type the following:
    Preferred DNS server: 8.8.8.8
    Alternate DNS server: 8.8.4.4
DNS server configuration
DNS server configuration
  • Click on OK and close everything now you may be able to correct DNS server not responding error in Windows 10.

[6 Solutions] Data Error (Cyclic Redundancy Check)


Solution 6. Update network adapter drivers


  • Press the key Windows + R and type ” devmgmt.msc »In the dialog box Execute to open the device manager.
  • Expand network adapters, then click with the right mouse button on your wi-fi controller (for example Broadcom or Intel) and select Update drivers.
Update Wifi Network Controller Driver
Update Wifi Network Controller Driver
  • In the window driver update, select ” Browse my computer for driver software“.
Choose a network driver
Choose a network driver
  • Select » Choose from a list of device drivers on my computer
  • Try to update the drivers from the versions listed.
  • If the above did not work, go to manufacturer’s website for update drivers: https://downloadcenter.intel.com/
  • Restart to apply the changes.

Leave a Comment